PH50: 110 lbs. Industrial Power Hammer

The PH50 is an industrial hydraulic power hammer designed for controlled forging, shaping, and forming operations. With a nominal drop weight of 110 lbs. per stroke, it delivers consistent impact energy for high-quality finishes across a wide range of forging applications.

The PH50 uses a dual-cylinder hydraulic system, with a rear cylinder and a front drive cylinder that impulses the ram for each stroke. This configuration provides precise control over drop force and speed while eliminating the need for special foundations or civil engineering work during installation.

- Industrial hydraulic power hammer for forging and shaping operations.
- Nominal 110 lb drop weight per stroke for consistent impact energy.
- Dual-cylinder hydraulic drive system for controlled ram movement.
- No special foundation or civil engineering required for installation.
- Designed for precision, reliability, and low maintenance operation.

Forging Capacities:
All capacities are dependent on material type, temperature, and tooling selection.

- Maximum round working capacity: Ø 2.75" (70mm).
- Maximum square working capacity: 2.36" × 2.36" (60×60mm).
- Nominal dropping weight: 110 lbs. (50kg).
- Strokes per minute: 240.

Standard Machine Features:
- Welded and die-cut steel frame for impact resistance and durability.
- Dual-cylinder hydraulic drive system with next-generation control valve.
- Built-in air compressor eliminating the need for external compressors.
- Automatic greasing system with transparent oil reservoir.
- Lapped cylinders with low-friction, non-contact piston design.
- Intake and exhaust mufflers to reduce idle noise.
- Automatic internal ventilation system.
- Double mechanical stop protection for safe tooling changes.
- Height- and orientation-adjustable front safety protection.
- Emergency stop and electrical motor protection systems.

Precision & Control:
The PH50 is engineered for maximum control of the forging stroke, allowing operators to achieve consistent results with minimal learning curve.

- Next-generation valve enables precise ram control.
- Controlled drop height and stroke consistency.
- Pedal-driven operation with mechanical safety interlocks.
- Stable frame design minimizes vibration transfer to the floor.

Environmental & Maintenance Design:
- Integrated system collects and separates air and oil discharge.
- Internal tray collects excess greasing oil for proper disposal.
- Near-zero maintenance design reduces long-term operating costs.
- Components sourced from leading European manufacturers for global service support.

Specifications:
- Machine type: Industrial hydraulic power hammer.
- Nominal drop weight: 110 lbs. (50kg).
- Ram range: 7.00" (180mm).
- Operating range: 9.00" (220mm).
- Main motor power: 3 HP (2.2 kW).
- Electrical supply: 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
- Approximate weight: 2,186 lbs.
- Machine dimensions: 31" × 51" × 70".

Standard Tooling Included:
- Upper and lower flat forging molds manufactured from heat-treated H13-equivalent tool steel.
- Support braces and adaptors for welding or fastening custom tooling.

Optional Tooling:
A wide range of optional forging dies and molds is available to expand forming capabilities.

- Specialized forging molds for round, square, and flat profiles.
- Profile-specific dies for drawing, edging, and shaping operations.
- Custom-manufactured molds available based on application requirements.

Common Uses:
The PH50 is used in forging shops and metalworking environments for shaping, drawing, flattening, and forming hot metal components. It is well suited for architectural metalwork, tooling fabrication, and general forging applications where controlled impact energy and repeatability are required.

Warranty:
Nargesa machines are built for long-term industrial service and are supported by an industry-leading warranty program. Each machine includes a standard 6-month warranty covering defective components. By registering the machine on Nargesa.com, customers extend this coverage to a full 3-year warranty on defective parts. The warranty covers replacement of defective components only and does not include labor, technical assistance, or travel.

System Configuration & Full Quotation:
The PH50 is configured based on forging requirements, material size, and tooling selection. To ensure correct configuration and pricing, tooling and accessories are quoted as part of a complete system. To request a full quotation and application review, call (704) 703-9400 or email Sales@QuantumMachinery.com.