C3006: 10 Foot Hydraulic Shear

The C3006 is a CNC-controlled vertical cut shear designed for precision cutting of sheet material in fabrication and production environments. It is intended for applications that require consistent cut quality, accurate positioning, and repeatable results across longer sheet lengths.

Constructed from stabilized, welded steel to resist deformation under load, the C3006 uses a vertical cutting system rather than a traditional swing-beam design. This configuration reduces cutting resistance, improves edge quality, and significantly extends blade life during continuous operation.

- CNC vertical cut shear for precision sheet metal cutting.
- Vertical cutting action reduces cutting force and energy consumption.
- Produces clean, accurate cuts with minimal material distortion.
- Designed for repeatable production and consistent cut quality.
- Suitable for fabrication and medium production environments.

Vertical Cut Shearing System:
The C3006 employs a vertical cut system in which the blade travels straight through the material rather than on an arc. This reduces resistance during cutting, resulting in lower energy consumption, improved edge finish, and reduced blade wear compared to swing-cut shears.

The vertical cut action minimizes deformation and produces a more consistent edge across the full cutting length, making it especially effective for stainless steel and parts requiring minimal secondary finishing.

- Lower cutting resistance compared to swing-beam shears.
- Improved edge quality with reduced burr formation.
- Significantly extended blade life due to uniform wear.
- Consistent cutting results across long sheet lengths.

CNC Control:
The C3006 is equipped with a compact CNC control system designed to simplify setup and ensure consistent cutting performance. The operator inputs material type, thickness, and cut length, and the control automatically positions the back gauge and cutting parameters for optimal results.

The CNC control features a 7" color touch-screen interface and supports storage of multiple cutting programs, allowing fast changeover between jobs and repeatable positioning without manual recalibration.

- Automatic CNC-controlled back gauge positioning.
- Storage of multiple cutting programs for repeat jobs.
- Touch-screen interface simplifies machine setup and operation.
- Supports accurate positioning and repeatability.

Cutting Capacities:
All cutting capacities are based on flat sheet material and may vary with material hardness.

- Maximum cutting length: 119.29" (3,030mm).
- Maximum mild steel thickness (450 N/mm²): 0.23" (6mm).
- Maximum stainless steel thickness (700 N/mm²): 0.15" (4mm).

Machine Performance:
- Strokes per minute: 12 strokes (full length).
- Fixed cutting angle: 1.75°.
- Positioning accuracy and repeatability: ±0.004" (±0.1mm).
- Back gauge travel: 27.56" (700mm).

Key Features:
- Independent hydraulic rammers for consistent cutting pressure across the blade.
- Four-edged upper and lower blades suitable for stainless steel cutting.
- LED lighting illuminates the cutting area for improved visibility.
- Thin marking zone supports precise manual cutting alignment.
- Foot pedal operation with emergency stop for controlled activation.
- Rear safety system with optoelectronic protection.

Specifications:
- Machine type: CNC vertical cut shear.
- Construction: Stabilized welded steel frame.
- Independent hydraulic rammers: 15 units.
- Throat depth (gooseneck): 6.81" (173mm).
- Squaring arms: Two 39.37" (1,000mm) arms.
- Hydraulic pump capacity: 22 liters/min.
- Hydraulic oil tank capacity: 96 liters.
- Main motor power: 12 HP (9.2kW).
- Electrical supply: 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
- Approximate weight: 17,700 lbs. (8,030kg).

Common Uses:
The C3006 is used for cutting flat sheet material in fabrication and production environments where accuracy, repeatability, and edge quality are critical. It is well suited for stainless steel panels, mild steel components, and long-length parts requiring consistent results across the full cut.

Warranty:
Nargesa machines are built for long-term industrial service and are supported by an industry-leading warranty program. Each machine includes a standard 6-month warranty covering defective components. By registering the machine on Nargesa.com, customers extend this coverage to a full 3-year warranty on defective parts. The warranty covers replacement of defective components only and does not include labor, technical assistance, or travel.

System Configuration & Full Quotation:
The C3006 is configured based on material type, thickness range, and production requirements. To ensure proper configuration and accurate pricing, options and accessories are quoted as part of a complete machine package. To request a full quotation and application review, call (704) 703-9400 or email Sales@QuantumMachinery.com.