MC200 Roll Bender

The MC200 is an industrial horizontal bending and forming machine designed for shaping flat bar, round bar, square bar, tube, and structural sections through controlled bending and forming operations. It is intended for fabrication shops that require greater forming capacity and tighter radii than entry-level machines, while maintaining manual control and operational flexibility.

Built around a reinforced welded steel frame and an industrial hydraulic system, the MC200 delivers increased forming force compared to smaller machines. Manual roller adjustment allows operators to control bend radius accurately, making the machine suitable for heavier sections, repeat fabrication work, and demanding general shop applications.

- Designed for horizontal bending and forming of profiles and structural sections.
- Provides increased forming capacity for heavier sections and tighter radii.
- Hydraulic forming system delivers smooth, controlled bending force.
- Manual adjustment supports flexible setup for custom and repeat work.
- Suitable for continuous use in fabrication and production environments.

Bending Capacities:
All bending capacities are based on mild steel profiles / applications. Minimum bending radii are listed exactly as provided by the manufacturer and may vary with material hardness and wall thickness. Dimensions marked with an asterisk (*) require optional rollers.

Round Tube:
- 2.50" × 0.12" wall (63.5×3mm)* — Minimum bending radius: 19.69" (500mm).
- 1.57" × 0.08" wall (40×2mm)* — Minimum bending radius: 9.84" (250mm).

Square Tube:
- 1.97" × 1.97" × 0.12" (50×50×3mm) — Minimum bending radius: 23.62" (600mm).
- 1.57" × 1.57" × 0.12" (40×40×3mm) — Minimum bending radius: 11.81" (300mm).

Solid Round Bar:
- Ø1.18" (Ø30mm) — Minimum bending radius: 5.91" (150mm).

Solid Square:
- 1.18" × 1.18" (30×30mm) — Minimum bending radius: 7.87" (200mm).

Flat Bar (Easy Way):
- 3.15" × 0.79" (80×20mm) — Minimum bending radius: 5.91" (150mm).

Flat Bar (Hard Way):
- 1.97" × 0.39" (50×10mm) — Minimum bending radius: 11.81" (300mm).

Angle Leg-Out:
- 1.57" (40mm) — Minimum bending radius: 16.54" (420mm).

* Optional rollers required.

Base Machine (Standard):
- Industrial horizontal bending and forming machine platform.
- Reinforced welded steel frame designed to resist deflection under load.
- Industrial hydraulic power system.
- Manual roller adjustment for radius control.
- Operator control interface for controlled bending cycles.
- Safety guarding and emergency stop controls.

Optional Tooling & Accessories (Quoted by Configuration):
- Bending dies for flat bar, square bar, and round bar.
- Profile-specific tooling for tube and angle sections.
- Optional rollers for round tube and specialty profiles.
- Material support arms and positioning accessories.
- Custom-manufactured tooling based on application requirements.

Working Capabilities:
- Bending and forming capacity varies based on tooling selection, section geometry, and operator setup.

Key Features:
- Rigid frame construction supports stable forming under higher loads.
- Hydraulic system delivers smooth, controlled bending force.
- Manual adjustment provides flexibility for varied fabrication work.
- Tool-change flexibility supports multiple profile types.
- Designed for long service life in fabrication environments.

Specifications:
- Machine type: Industrial horizontal bending and forming machine.
- Construction: Reinforced welded steel frame.
- Power system: Industrial hydraulic power unit.
- Electrical configuration: Configurable to shop requirements.
- Control type: Manual operation.

Common Uses:
The MC200 is used for bending and forming flat bar, round bar, square bar, tube, and structural sections in fabrication shops and production environments. It is well suited for frames, brackets, architectural components, and formed parts that require greater capacity and tighter radii than smaller machines can support.

Warranty:
Nargesa machines are built for long-term industrial service and are supported by an industry-leading warranty program. Each machine includes a standard 6-month warranty covering defective components. By registering the machine on Nargesa.com, customers extend this coverage to a full 3-year warranty on defective parts. The warranty covers replacement of defective components only and does not include labor, technical assistance, or travel.

System Configuration & Full Quotation:
The MC200 is configured based on section size, bending requirements, and tooling selection. To ensure proper configuration and accurate pricing, tooling and accessories are quoted as part of a complete machine package. To request a full quotation and application review, call (704) 703-9400 or email Sales@QuantumMachinery.com.