PP200CNC: 20 Ton Horizontal Press Brake

The PP200CNC is a 20-ton horizontal press brake designed for cold bending, folding, punching, cutting, and forming operations on short-length workpieces and profiles. It is used in fabrication and ornamental environments where fast tool changes, repeatable results, and application-specific tooling flexibility matter more than long-bed press brake capacity.

Built from a 2.36" (60mm) thick welded, stabilized, and machined steel monoblock, the PP200CNC provides a rigid horizontal forming platform that supports bending and forming operations that are difficult or impractical on conventional vertical press brakes. Its CNC-controlled setup enables repeat production with consistent angles and programmed sequences while keeping tooling simple and shop-buildable.

- Horizontal forming architecture supports bending, folding, cutting, and shaping in cold.
- CNC control improves repeatability for multi-step parts and short-run production.
- Fast tooling changeover supports rapid job switching without long downtime.
- Tooling can be fabricated by the customer or a local toolmaker for specialized parts.
- Frameless work table design improves part movement and operator visibility from the side.

Working Capacities:
All forming results depend on material type, thickness, tooling selection, and operation method.

- Working strength: 20 tons (20,000kg / 200kN).
- Maximum displacement: 9.8".
- Working speed: 0.39" per second.
- Return speed: 0.37" per second.

CNC Control – ESA S652:
The PP200CNC is equipped with a 7" color touch-screen control designed to simplify setup and support repeat production. The operator inputs material, thickness, angle, and tooling selection, and the control automatically programs the process parameters for the forming cycle.

- Stores up to 10,000 programs.
- Programs up to 50 different angles on the same piece.
- Dimensions programmable in inches or millimeters.
- Tooling library with the ability to add new dies and punches.
- Material and thickness library with editable entries.
- Manual or automatic operation modes.
- Automatic elastic recovery correction (springback).
- Integrated piece counter.
- On-screen alarm diagnostics and preventive maintenance warnings.
- Remote connectivity capability for manufacturer support.

Key Advantages:
- Fast tool changeover supports high-mix work and short runs.
- Folding operations reduce risk of damaging punches and dies compared to conventional press brakes when working thicker material sections.
- Horizontal layout supports forming operations that are difficult to complete on a conventional press brake.
- Simple, non-complex head drive supports customer-built tooling and quick adaptation to custom dies.

Base Machine (Standard):
- Horizontal press brake platform with 2.36" (60mm) thick welded steel monoblock workbench, stabilized and machined.
- Monoblock hydraulic power unit with positioning and pressure regulation valves.
- Pressure regulator with pressure gauge for real-time force control.
- Fully guided hydraulic cylinder to prevent piston bending during forming cycles.
- Frameless work table design to keep part movement unobstructed.
- Safety double activation hold pedal for cycle operation.
- Low noise level for improved operator working conditions.
- Dies support shelf included.
- Lateral stop positionable left or right.

Standard Tooling Included:
- Folding die: 3.93" (100mm) maximum folding length.
- 4-way V-die openings: 0.63", 0.86", 1.37", 1.96" (V16, V22, V35, V50).
- Maximum folding thickness: 0.315" (8mm).

Tooling Notes:
Sheet thickness ranges listed below are as provided for the included 4-way V-die openings.

- V16: Sheet from 0.039" to 0.118" (1 to 3mm).
- V22: Sheet from 0.078" to 0.15" (2 to 4mm).
- V35: Sheet from 0.118" to 0.23" (3 to 6mm).
- V50: Sheet from 0.157" to 0.315" (4 to 8mm).

Optional Tooling & Accessories (Quoted by Configuration):
The PP200CNC supports a broad catalog of optional tooling for bending, forming, punching, notching, cutting, end forming, and specialty ornamental work. Optional tools are selected based on material type, profile geometry, and finished part requirements.

- End forming tooling for expanding and reducing tube ends (REF: 140-16-01-00016).
- Promecam punch holder and Promecam punches for short-length folding operations (REF: 140-16-01-00023 and related punches).
- Promecam V-dies for thicker sheet metal and flat bar folding up to 15mm (configuration dependent).
- Straightening dies for correcting profiles and faulty parts (REF: 140-16-01-00017).
- Pipe notching tooling for 90° tube joint prep (capacity varies by die set).
- Baluster forming dies and forming die adapter for ornamental components (multiple die options).
- Flat bar and sheet cutting tooling up to 3.93" (100mm) length × 0.39" (10mm) thickness in mild steel (REF: 140-16-01-00014).
- Punching die tooling with round, square, rectangular, and oval punch capacity ranges (REF: 140-16-01-00022).
- Large-radius bending tooling for curves and profile forming (REF: 140-16-01-00006).
- Clamp and bar clamp forming dies for fabricated fastening components (REF: 140-16-01-00024 and REF: 140-16-01-00028).
- Twisted bars forming die for braided/twisted effects on plate and bar (REF: 140-16-01-00013).

Specifications:
- Machine type: 20-ton horizontal press brake with CNC control.
- Tooling support table: 23.6" × 46".
- Main motor power: 3 HP (2.2kW).
- Electrical supply: 220 Volt / 1 Phase / 60Hz or 220 Volt / 3 Phase / 60Hz or 480 Volt / 3 Phase / 60Hz.
- Machine dimensions: 38" × 47" × 45".
- Approximate weight: 1,450 lbs.

Footprint Dimensions:
Overall footprint dimensions are provided for installation planning and work area layout.

- Overall width: 46.45".
- Overall length: 41.33" (with bar stop).
- Overall length: 25.98" (without bar stop).
- Overall height: 44.48" (bottom to top).
- Table height: 37.3" (bottom to table top).

Common Uses:
The PP200CNC is used for cold folding and bending of short-length material, profile straightening, flat bar and sheet cutting, punching and perforating, tube notching for 90° joints, tube end forming for slip-fit or weld prep, and specialty forming for handles, flanges, clamps, hinges, and ornamental components. It is best suited for operations where tooling flexibility and fast changeover support mixed job flow without tying up a long-bed press brake.

Warranty:
Nargesa machines are built for long-term industrial service and are supported by an industry-leading warranty program. Each machine includes a standard 6-month warranty covering defective components. By registering the machine on Nargesa.com, customers extend this coverage to a full 3-year warranty on defective parts. The warranty covers replacement of defective components only and does not include labor, technical assistance, or travel.

System Configuration & Full Quotation:
The PP200CNC is configured based on material type, required forming operations, and tooling selection. To ensure correct configuration and accurate pricing, optional tooling is quoted as part of a complete machine package. To request a full quotation and application review, call (704) 703-9400 or email Sales@QuantumMachinery.com.