PI85 HYDRAULIC LOCK PRESS

PI85 HYDRAULIC LOCK PRESS

  • Product SKU: PI85 HYDRAULIC LOCK PRESS
Available: In Stock
$7,900
Successful pre-order.Thanks for contacting us!
Wishlist Compare

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

Price: $7,900

Electrical Options:

  • 220V / 3PH / 60Hz

  • 480V / 3PH / 60Hz

Hydraulic press for locks QUANTUM NARGESA PI85, with a fast and accurate perforation for the casing, handle and lock hole in a tube. It's a state-of-the-art novelty in the world of locks. Patented by Nargesa in 2006, this machine makes us the leaders in the manufacturing of this kind of machine. They fit 85% of locks of all trademarks and models.

TECHNICAL FEATURES

  •  Normally, one operative has an average time between 30 - 45 minutes to make one whole operation for a casing, handle holes and the lock hole in a square or rectangular tube. With the PI85 Nargesa the time gets reduced to less than one minute. This is a machine for high production.

  • The finish is perfect, with the proper tolerance to place the lock with no need to use a bezel. Thus the assembling time is minimum.

  • Many companies that have bought this press for locks PI85, not only for their own use but also to sell the ready-to-be-used tubes to other companies.

  • The tubes that can be used with the machine are 35x35, 40x40, 40x50, 40x60, 40x70, 40x80, 50x50, 50x60, 50x70 and 50x80.

  • Tube thickness can be 1,5mm and 2mm. No matter the material, it can either punch normal steel, galvanized steel or stainless steel.

  • It's important to bear in mind the casing must be always made in the side of 35, 40 or 50mm.

  • The perforation of the lock hole and the handle could be combined, it means we can punch a tube with lock and handle on both ends,  as we can as well make either the handle or the lock in the other.

  • The casing length is adjustable as it is as well the entrance of the lock. It ranges from 18mm to 37mm.

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

Price: $7,900

Electrical Options:

  • 220V / 3PH / 60Hz

  • 480V / 3PH / 60Hz

Hydraulic press for locks QUANTUM NARGESA PI85, with a fast and accurate perforation for the casing, handle and lock hole in a tube. It's a state-of-the-art novelty in the world of locks. Patented by Nargesa in 2006, this machine makes us the leaders in the manufacturing of this kind of machine. They fit 85% of locks of all trademarks and models.

TECHNICAL FEATURES

  •  Normally, one operative has an average time between 30 - 45 minutes to make one whole operation for a casing, handle holes and the lock hole in a square or rectangular tube. With the PI85 Nargesa the time gets reduced to less than one minute. This is a machine for high production.

  • The finish is perfect, with the proper tolerance to place the lock with no need to use a bezel. Thus the assembling time is minimum.

  • Many companies that have bought this press for locks PI85, not only for their own use but also to sell the ready-to-be-used tubes to other companies.

  • The tubes that can be used with the machine are 35x35, 40x40, 40x50, 40x60, 40x70, 40x80, 50x50, 50x60, 50x70 and 50x80.

  • Tube thickness can be 1,5mm and 2mm. No matter the material, it can either punch normal steel, galvanized steel or stainless steel.

  • It's important to bear in mind the casing must be always made in the side of 35, 40 or 50mm.

  • The perforation of the lock hole and the handle could be combined, it means we can punch a tube with lock and handle on both ends,  as we can as well make either the handle or the lock in the other.

  • The casing length is adjustable as it is as well the entrance of the lock. It ranges from 18mm to 37mm.