NTS 315: 12.50" Semi-Auto, Double-Column Cold Saw (3-7/8" Round Tube Capacity)

NTS 315: 12.50" Semi-Auto, Double-Column Cold Saw (3-7/8" Round Tube Capacity)

  • Product SKU: NTS 315: 12.50" SEMI-AUTOMATIC DOUBLE-COLUMN COLD SAW
Available: In Stock
$7,600
Successful pre-order.Thanks for contacting us!
Wishlist Compare

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The Quantum Macc NTS 315 Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and 60 degrees left; and the head also has rotation stops at 45° - 0° - 45° - 60°. The NTS 315 has a vice that is complete with an anti-burr device, motor pump for blade lubrication, shave breaker to keep the blade clean. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual and steel pedestal.

Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:

  1. Closing of Vice & Activation of Blade Motor.

  2. Cutting Head Begins Down-Stroke.

  3. Completes Cut & Head Returns to Initial Position & Blade Motor Stops.

  4. The Vice will then Open.

    (REPEAT)

Options (Options are at an additional cost):

  • (+$700) Equip the NTS 315 with a 2nd Vice

  • (+$1,000) Equip the NTS 315 with a Variable Speed Inverter

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The Quantum Macc NTS 315 Vertical Semi-Automatic Cold Saw has a moveable head that can move up to 45 degrees right and 60 degrees left; and the head also has rotation stops at 45° - 0° - 45° - 60°. The NTS 315 has a vice that is complete with an anti-burr device, motor pump for blade lubrication, shave breaker to keep the blade clean. This unit is equipped with a bar stop, bar support arm, and service tools, as well as the machine's manual and steel pedestal.

Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:

  1. Closing of Vice & Activation of Blade Motor.

  2. Cutting Head Begins Down-Stroke.

  3. Completes Cut & Head Returns to Initial Position & Blade Motor Stops.

  4. The Vice will then Open.

    (REPEAT)

Options (Options are at an additional cost):

  • (+$700) Equip the NTS 315 with a 2nd Vice

  • (+$1,000) Equip the NTS 315 with a Variable Speed Inverter