TA 400-S: 15.75" Semi-Automatic Non-Ferrous, Aluminum Cutting Saw (5-1/2" Round Tube Capacity)

TA 400-S: 15.75" Semi-Automatic Non-Ferrous, Aluminum Cutting Saw (5-1/2" Round Tube Capacity)

  • Product SKU: TA 400-S: 15.75" SEMI-AUTOMATIC NON-FERROUS
Available: In Stock
$7,200
Successful pre-order.Thanks for contacting us!
Wishlist Compare

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The Quantum Macc TA 400-S features, semi-automatic shear for cutting solid or section bars made of aluminum or light alloys. Knob with small stake ensuring fast positioning of the head to 0° and 45° right and left. The overall dimensions: 59” x 40” x 63” High. Instructions manual and spare parts included. The blade holder shaft is on bearings with Teflon jaws to hold the piece. Two pneumatic vices and bar support arm with bar stop. Available In 220V / 3PH or 480V / 3PH.

Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:

  1. Closing of Vice & Activation of Blade Motor.

  2. Cutting Head Begins Down-Stroke.

  3. Completes Cut & Head Returns to Initial Position & Blade Motor Stops.

  4. The Vice will then Open.

    (REPEAT)

Options (Options are at an additional cost):

  • (+$300) Equip the TA 400-S with a Vertical Vice

Ready to place an order, or do you have any questions?
Call us at (909) 476-8007

The Quantum Macc TA 400-S features, semi-automatic shear for cutting solid or section bars made of aluminum or light alloys. Knob with small stake ensuring fast positioning of the head to 0° and 45° right and left. The overall dimensions: 59” x 40” x 63” High. Instructions manual and spare parts included. The blade holder shaft is on bearings with Teflon jaws to hold the piece. Two pneumatic vices and bar support arm with bar stop. Available In 220V / 3PH or 480V / 3PH.

Cycle start is obtained by pressing the relevant start pedal. The machine performs the following operations during the cutting cycle:

  1. Closing of Vice & Activation of Blade Motor.

  2. Cutting Head Begins Down-Stroke.

  3. Completes Cut & Head Returns to Initial Position & Blade Motor Stops.

  4. The Vice will then Open.

    (REPEAT)

Options (Options are at an additional cost):

  • (+$300) Equip the TA 400-S with a Vertical Vice